How it works

Using proven chemical principles we developed a proprietary system of increasing dissolved oxygen in the water. The basis of this system is producing a sudden turbulence in the water. Highly engineered perforated plates produce maximum turbulence over standard plastic fillers. Then by using a combination of vacuum and pressure the oxygen is "injected" into the water and the nitrogen is released. An oxygen which is undissolved is recirculated through the system for maximum efficiency. Of course, if oxygenation is your sole objective, we only utilize the one step of injection.

Because our approach utilizes turbulence in the water we require a seven foot head (two meter) of water for our systems. This head can be achieved by either a natural water head or through the use of pumps. The considerable results from the installation of our products will increase oxygen saturation and reduced nitrogen. Take a look at the different models and choose which model best meets your needs.

10" Oxygenation System -
50 to 100 gallons per minute

15" Oxygenation System -
300 to 700 gallons per minute

20" Oxygenation System -
700 to 1400 gallons per minute